Is it possible to move the location of a toilet? - Liquid Image (2023)

Yes, it is possible to move the location of a toilet. Whether you are looking to move it within the same room or relocate it to a different area of your home, it is possible to do this. Moving a toilet requires following certain steps and procedures, and it is important to ensure it is done correctly in order to prevent any potential leaks and other issues.

Firstly, you will want to turn off the water supply to the toilet so that no water will be able to flow in or out during the relocation process. Next, you will want to drain the tank and bowl of all water.

You will then want to disconnect the flush valve and unscrew the toilet from the floor flange. You may need additional help here as the toilet is likely to be very heavy. You will then want to remove the wax seal that is located around the base of the toilet and clean the area of any remains.

Finally, you can relocate the toilet and reconnect it to the plumbing stop and secure it in place, then reinstall the flush valve and tank, and connect the water supply to the new location.

Table of Contents

Is it difficult to relocate a toilet?

Relocating a toilet can be an arduous task. It requires an extensive understanding of plumbing and an adept ability to work with tools in tight spaces. The most effective approach is to shut off the water, disconnect the existing toilet, be sure to take note of how the toilet was connected to the floor/sewage/water lines, and carry the detached toilet out of the area.

From there, you have to ensure the new area is suitable for plumbing and a toilet, measure the area to ensure the new toilet will fit, connect the new toilet to the water, sewage, and floor lines, and seal the connections to avoid a leak.

It is then important to test the connections and re-connect the water line.

In short, relocating a toilet requires specialized knowledge, an understanding of the specific setup, and a considerable amount of time and effort. It can be a difficult task and is often best left to a professional.

(Video) The One and Only WD40 Trick Everyone Should Know and 25 Other Uses

Is it a big deal to move a toilet location?

Yes, moving a toilet location is a big deal because it involves potentially changing the plumbing, depending on where you want to move the toilet. If a move requires a drastic change, like moving the toilet further away from the house, it means digging up and rerouting the existing sewage line.

Not only is this expensive and time consuming, but it also requires permits and other professionals, such as plumbers, to do the job, which increases the price even more. If moving the toilet only requires small adjustments, like relocating the water supply line, then the cost will be less—but it still is a big deal.

Moving a toilet also means potentially reconfiguring the bathroom, which involves other elements, such as changing the tile, replacing drywall, and refinishing the floor. Therefore, it is not something that can be taken lightly since it involves a lot of time, money, and labor.

How far can you relocate a toilet?

Relocating a toilet can be a tricky and time-consuming task, and the distance you can relocate one depends on a number of factors, such as the new piping installed and the venting available. Generally, a toilet can be relocated up to 5 feet away from the current plumbing, but any further than that could start to become difficult.

If the relocation is to take the toilet further than 5 feet away, you should consider having a professional plumber come in and assess the situation. They can advise you of the extra piping and venting that might be needed and will be able to determine the best course of action.

For any toilet relocation, it’s important to remember that the water closet bowls should stay level. If floor joists and other obstructions get in the way, the bowl may not be able to be levelled, and the job could become even more complicated.

Adding in new materials and labour can certainly make the job more expensive, so it’s generally recommended that you keep the relocate as close to the original plumbing as possible.

How much does it cost to move a toilet over?

The cost of moving a toilet over will depend on several factors, including the size of the toilet, the distance it needs to be moved, the materials and labour needed, and any additional services such as inspections that may be required.

A standard-sized toilet will usually cost between $100 and $400 to move, while a larger toilet or a more complicated move could cost up to $1,000 or more. The cost could also increase depending on any extra plumbing work that may need to be done, such as relocating a drain or vent pipe.

Hiring a qualified plumber is important for this kind of job, as it ensures that the work is done properly and safely, and will usually include an inspection at the end. It’s a good idea to get a few quotes from different plumbers, to get a good idea of how much the job will cost, before you make the final decision.

Do you need planning permission to move a toilet?

In most cases, yes, planning permission is required to move a toilet in a residential home or commercial building. When remodeling a bathroom, adding a new toilet, or relocating an existing one, you may need to seek out the necessary approvals from local building authorities before making any changes or additions to your existing space.

(Video) 10 Signs Your Kidneys Are Crying for Help

When seeking planning permission to move a toilet, local authorities take into account a variety of factors, such as the size of the bathroom and the plumbing layout. You must also consider any local standards and codes that may be in place, as well as any potential environmental impacts caused by the installation of the new toilet.

Additionally, if the relocation of the toilet requires a structural change to the building, such as installing a new header for the plumbing fixtures, you may need additional permits or approvals.

If you are unsure of the exact process for obtaining planning permission to move a toilet, you may want to consult a professional building contractor and/or local authorities for further guidance. They can review the specifics of your project and advise you whether a permit is necessary and what steps you may need to take in order to obtain one.

How far can a toilet be from the main drain?

The maximum distance that a toilet can be placed from a main drain will depend mostly on the local building codes in the area. Generally, the distance should not exceed 50 feet with a minimum number of 1.

5 in/ ft fall. For example, a toilet located 50 feet away should have a 2. 5 inch drop per 10 feet of pipe. It’s important to ensure proper drainage equipment and pipe sizing in order to guarantee that the toilet functions properly.

You should also consider the size and shape of the room or area in which the toilet is being installed. If needed, you should use a larger diameter pipe or a longer pipe run to provide enough space for the toilet to function properly.

It’s also important to note that if the toilet is located more than 50 feet from a main drain, a sewage ejector pump may be required in order to aid the flush. Additionally, if the toilet is on any type of septic tank, the distance should not exceed 35 feet.

All in all, make sure that you check your local building codes prior to installing your toilet to ensure a safe and proper distance from the main drain.

Can you move a toilet to other side of house?

Yes, it is possible to move a toilet to the other side of a house. Doing so may require you to make modifications to the existing plumbing, as well as possibly move some walls and flooring. If the toilet is being moved to another room, then additional plumbing may need to be installed, such as drain pipes and a waste water line.

It is important to seek the assistance of a qualified plumber when attempting a project of this kind, as the complexities and the safety of a project like this should not be taken lightly.

Can you rotate a toilet 90 degrees?

Yes, it is possible to rotate a toilet 90 degrees, but it is not something that is typically done. To rotate the toilet, you would need to disconnect the waste pipes from the toilet and move them to another position so that the toilet can fit in the new orientation.

(Video) DON'T TOUCH THE TOILET SEAT 🙀 | Smart & clean portable gadget to use to move the toilet seat #shorts

Depending on the size and shape of the bathroom, you may need to do some additional remodeling to ensure that the toilet has enough space to be installed and rotated. Additionally, you would need to adjust the angle of the fill valve so that it properly accommodates the new orientation of the toilet.

A professional plumber may be able to help you with this process.

How far is too far for toilet from wall?

The optimal distance for a toilet from the wall is between 18 to 24 inches. This ensures that the toilet is easily accessible, and people have enough room to move around and access the toilet without any difficulty.

Additionally, the ideal distance allows someone to clean the toilet effectively without having to reach too far. It also helps to provide enough space for any toilet accessories that might be used. If the distance from the wall is too great, it can lead to difficulty in accessing, cleaning, and utilizing the toilet properly.

Can you reposition a toilet?

Yes, you can reposition a toilet. While the exact steps to do this will depend on the type of toilet and the space it is being repositioned in, some general steps will help you do this project. First, you should turn off the water supply to the toilet and flush out the water.

Disconnect the toilet from the water supply, and the drainage line. If it is a two-piece toilet, gently remove the base of the toilet for easy access to the wax seal. Then, carefully and slowly lift the toilet from the floor and onto a piece of scrap cardboard or a mat that will prevent the floor from being scratched and damaged.

After that, you will want to move any plumbing or water supply lines as needed to accommodate your new toilet position. Finally, you will need to attach the new recycling flange and reinstall the toilet on top of it in the new position.

Make sure the wax seal is securely in place, the toilet is level, and the water supply is connected. Once it is all in place, turn the water back on and you should be able to start using your new toilet in its new location.

Can toilet plumbing have 90 degree angles?

Yes, toilet plumbing does have the ability to have 90 degree angles. This is usually done to increase the efficiency of the plumbing system and to save space. 90 degree angles can be useful for small bathrooms, as it allows for a larger space for other fixtures.

In some cases, 90 degree angles are also used to provide a better flow of water or to supply extra drainage. Generally, a 90 degree angle is used when rerouting pipes, adding fixtures, or when anti-siphon measures are needed.

It is important to note, that 90 degree angles should only be used when absolutely necessary, as they can create decreased water pressure, and lead to clogs or backflow issues.

Can a toilet and shower share the same vent?

Yes, a toilet and shower can both share the same vent. Having a single vent for both fixtures will save you both time and money on plumbing, though some additional considerations should be taken into account.

(Video) How to Use Harpic Flushmatic | Flushmatic Cistern Toilet Cleaner | Flushmatic Toilet Cleaner Blocks

Venting a toilet and shower in the same vent line should follow all local codes and regulations. Potential ventilation issues can arise when the fixtures are at opposite ends of the house, making the vent pipe run too long.

Generally, the maximum recommended vertical height of the vent pipe should not exceed 6 feet. In some cases, it may be necessary to install a larger or secondary vent pipe in order to maintain adequate ventilation for both fixtures.

Additionally, it’s important to make sure the vent pipe isn’t compromised by freezing conditions, as this could cause clogs and serious plumbing issues. Proper maintenance can ensure your system is working optimally.

How long does a plumbing reroute take?

The length of time it takes to complete a plumbing reroute can vary drastically depending on the type and complexity of the job. If the reroute is minor and only requires a few modifications to existing fixtures and pipes, it could take as little as a few hours to complete.

However, a larger and more complex reroute will require additional materials, require multiple tasks to be completed, and could take days or even weeks to complete. Generally speaking, the installation of new plumbing fittings and fixtures is the most time-consuming aspect.

Additionally, if access is limited due to walls, floors, or other obstacles, the job can become even more challenging and time-consuming. Factors such as these mean it can be difficult to provide a definitive answer to the question of how long it takes to complete a plumbing reroute.

Can I switch toilet and sink locations?

Yes, you can switch toilet and sink locations in some cases. Depending on the layout of the room and the existing plumbing, it may be possible to swap the two without major plumbing work.

The main consideration when relocating a toilet or sink is the proximity of the existing sewage and water lines. If the lines are too far apart, you will need to have a plumber run new lines from the toilet or sink to the existing outlets; however, if the existing lines are close enough, the move may be possible.

You should also take measurements to ensure that the switch will be practical. For example, if your toilet and sink are on opposite sides of the bathroom, you won’t be able to move them closer together unless you add more plumbing lines.

Additionally, bathrooms tend to be relatively small, so you’ll need to make sure you have enough space to comfortably fit both fixtures.

Finally, you should also factor in any electrical work that may be necessary if you’re relocating a vanity sink. If you’re just moving a toilet, you may not need to worry about any electrical outlets, but if your switch involves a sink, you’ll need to make sure the necessary wiring is in place for the new sink.

(Video) Dry Your Wet Water Damaged Phone ● I Found The Fastest Way ( Rice is the Worst ! )

Overall, it is possible to switch toilet and sink locations in some cases. If the existing plumbing lines are close enough, you may be able to complete the move without major work. However, once you have taken measurements to make sure the switch is practical, you should consult a plumber to ensure the switch is safe and there’s no potential damage to water lines or other plumbing.


1. How Your Home Plumbing Works (From Start to Finish) | GOT2LEARN
2. Don't Go Inside If You See a Red Cup Under Toilet Seat
3. Clog Remover Drain Pipe Basin Cleaner Clogged Drainage Remover Powder for Toilet and Kitchen 110g
4. What Your Urine Color Says About Your Health | Urinary System Breakdown | #DeepDives
5. How the Digestive System Works
(Coloplast Stoma Care)
6. Diverticulitis Signs & Symptoms (And Why They Occur)
(JJ Medicine)


Top Articles
Latest Posts
Article information

Author: Horacio Brakus JD

Last Updated: 31/10/2023

Views: 6327

Rating: 4 / 5 (71 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Horacio Brakus JD

Birthday: 1999-08-21

Address: Apt. 524 43384 Minnie Prairie, South Edda, MA 62804

Phone: +5931039998219

Job: Sales Strategist

Hobby: Sculling, Kitesurfing, Orienteering, Painting, Computer programming, Creative writing, Scuba diving

Introduction: My name is Horacio Brakus JD, I am a lively, splendid, jolly, vivacious, vast, cheerful, agreeable person who loves writing and wants to share my knowledge and understanding with you.